Fully sealed shrink wrap packer applied to the packaging of door and panel boards

Technical features of automatic side sealing shrink wrap packer machine:

1. This product is a fully automatic side-sealing machine independently developed by our company. It is used for the flow of mass packaging. Fully automatic feeding, conveying, bagging, sealing and cutting are completed at one time, and the work efficiency is high;
2. The longitudinal seal adopts a gantry support structure and linear guide rails on both sides, so that the sealing and cutting forces are balanced, and the frame is not easy to deform. The sealing and cutting knife adopts high-quality alloy steel spraying Teflon treatment, sealing and cutting does not stick to the film, the sealing is firm, the sealing and cutting has no smoke, and there is no pollution;
3. The side sealing adopts a constant temperature side sealing knife, and the sealing is straight and firm. The length of the packaged items is not limited. The film feeding belt adopts a widened and thickened conveyor belt, which has a long service life and is easy to replace;
4. The whole machine adopts PLC programming controller, equipped with two sets of horizontal and vertical photoelectric detection, which can realize high-speed, unmanned automatic operation;
5. It is easy to adjust the product specifications, and it can be easily completed by adjusting with a hand wheel, and the operation is easy and simple;
6. It can be directly connected to the production line for use;
7. It has a protective function to prevent accidentally cutting the packaging and protect the safety of the operator;
8. The front-end power feeding conveyor line can be selected or customized according to user needs.

Technical characteristics of heat shrink tunnel machine:

1. The perfect combination of Schneider AC contactor and high-power solid-state voltage regulator is equipped with intelligent temperature control, which makes the system temperature more accurate and greatly extends the service life;
2. It adopts solid roller conveyor chain, and the roller is covered with high temperature resistant casing. Can bear heavy objects and is not easy to mucous membranes. (Net conveyor belt can be used);
3. The solid roller is driven by the transmission chain, and at the same time the solid roller rotates, the bottom surface of the object is not affected by the solid roller, and the shrinkage effect of each surface is uniform;
4. The high-power wind-transporting motor ensures that the wind is strong enough to make the packaging achieve the perfect packaging effect at one time;
5. The inner tank adopts hot air circulation structure, uniform heat transfer, less heat loss, and good energy saving effect. Adjusting air doors are added on both sides, and the air volume distribution on the side and bottom can be adjusted according to the shape of the article to obtain a better shrinkage effect;

Use range:

This machine is widely used in shrink packaging of photo frames, picture frames, aluminum profiles, water pipes, wooden floors and other materials. Suitable for various shrink packaging materials such as POF, PE, PVC, etc.

Options:

1. Conveyor line with continuous feeder;
2. Packing small-size products, adding a conveying tight joint device;
3. It is convenient to adjust the product specifications, and it can be easily completed by adjusting with a hand wheel, and the operation is easy and simple;
4. It can be directly connected to the production line for use;
5. It has a protective function to prevent accidentally cutting the packaging and protect the safety of the operator;

Fully sealed shrink wrap packer applied to the packaging of door and panel boards

Post navigation


One thought on “Fully sealed shrink wrap packer applied to the packaging of door and panel boards

Comments are closed.